| Model Number : SSC-486H |
| DX4 Half-size Single Board |
| |
Features |
| |
 |
Intel™ DX4-75/100MHz |
| |
|
Two Sockets SIMM 1MB to 64MB DRAM (EDO, DRAM) |
| |
Specifications |
| |
CPU: |
Intel™ DX4-75/100MHz, AMD™ 486DX2-66/80MHz, Cyrix™ Cx486DX2-50/66MHz, UMC 486SX-33 |
| |
Bus Interface: |
ISA Bus |
| |
Memory: |
Two Sockets SIMM 1MB to 64MB DRAM (EDO, DRAM) |
| |
Cache: |
128KB, 256KB or 512KB |
| |
I/O Chipset: |
SMC FDC37C665 |
| |
IDE: |
Four IDE disk drives supporting ATA/33 |
| |
FDD: |
Supports up to two floppy disk drives |
| |
SerialPort: |
16C550 UART-compatible RS-232/422/485 x 1 and RS-232 x 1 serial ports with 16 byte FIFO |
| |
PC/104: |
PC/104 connector for 16bit ISA Bus |
| |
IrDA: |
One IrDA TX/RX header |
| |
BIOS: |
27C512 EPROM with Award BIOS |
| |
Watchdog Timer: |
Sets 1, 2, 10, 20, 110, 220 seconds activity trigger with Reset or NMI |
| |
Maximum Power Consumption: |
model : 2571-08TS, 8-pin male con. |
| |
Operating Temperature: |
0~60° C |
| |
Humidity: |
5%-95% (non-condensing) |
| |
Dimension: |
7" x 4.8" |
| |
