| Model Number : P3-7780 |
| Pentium® III Celeron"/Coppermine" SBC with VGA |
| |
Features |
| |
 |
Socket 370 support 266~850MHz |
| |
|
Onboard Winbond 83781D Hardware Monitor |
| |
Specifications |
| |
CPU: |
Socket 370 for Intel®Celeron"/Coppermine"366 ~850MHz CPU |
| |
Bus Interface: |
PICMG Bus |
| |
Bus Clock Rate: |
100MHz system clock |
| |
Memory: |
Three DIMM sockets providing up to 1GB |
| |
Chipset: |
Intel" 440BX AGPsets with I/O subsytem |
| |
VGA: |
ATI Rage Pro XL Graphics Controller : On-board 64-bit graphics accelerator with support for Digital Flat panel monitors and superior support for 3D and motion video, with 8MB GSRAM |
| |
IDE: |
Four IDE disk drives supporting ATA/33 with transfer rate up to 33MB/sec |
| |
FDD: |
Supports up to two floppy disk drives |
| |
Parallel: |
One enhanced bi-directional parallel port supporting SPP/ECP/EPP |
| |
SerialPort: |
16C550 UART-compatible RS-232/422/485 x 1 and RS-232 x 3 serial ports with 16byte FIFO |
| |
IrDA: |
One IrDA TX/RX header |
| |
BIOS: |
Award PnP BIOS |
| |
DMA Channels: |
7 |
| |
Interrupt Levels: |
15 |
| |
Maximum Power Consumption: |
[email protected]+5V; [email protected] +12V; [email protected] -12V |
| |
Operating Temperature: |
0~60° C |
| |
Humidity: |
10%-95% (non-condensing) |
| |
Hardware Monitor: |
Winbond 83781D chipset |
| |
Dimension: |
Full sized 6 layer PCB, 13.3"(L) x 4.88"(W) |
| |
