PC/104 Modules
Image Specification

  • One Compact Flash Typw II socket for IDE HDD simulation; can be accept Microdrive from IBM
  • 1 x 44-pin & 1 x 40-pin pin-header for IDE Interface
  • 1 x RS-232 & 1 x RS-232/422/485 ports (with Auto-Direction function) Interrupt selectable (IRQ 3/10 for COM1; IRQ 4/11 for COM2; IRQ 5/7 for LPT) I/O address selectable (3E8H/3F8H for COM1; 2E8H/2F8H for COM2; 278H/378H for LPT)
  • LPT port supports SPP & EPP mode
  • Master/Slave jumper for IDE port
  • Power Requirement : +5V DC
  • Quotation

  • Complies with PCMCIA2.1 and JEIDA4.2 standard
  • Accepts TypeI/II/III PCMCIA cards
  • 16-bit data bus
  • Easy host interface using ISA I/O addresses 3E0h, 3E1h
  • Programmable IRQs to level mode or edge trigger mode
  • PCMCIA-AT-A Disk interface support
  • DMA mode support
  • Quotation